If you have a fire or water emergency, please call us now at (619) 280-2377

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

Archived Fire Damage Blog Posts

Protecting Your Home: 10 Tips to Prevent Candle Fires

12/20/2023 (Permalink)

A kitchen with fire damage. By following these 10 tips, you can enjoy the cozy glow of candles without putting your home at risk of a fire.

Your safety is a top priority, and today we're here to discuss a common household hazard - candle fires. Candles can create a warm and inviting atmosphere in your home, but if not handled with care, they can also pose a significant fire risk. In this blog, we'll provide you with essential tips to prevent candle fires and keep your home safe.

  1. Choose Safe Candle Types

Opt for flameless LED candles, which can provide a realistic glow without the risk of an open flame. They are a safe and energy-efficient alternative to traditional candles.

  1. Keep Candles Away from Flammable Materials

Place candles at least 12 inches away from anything that can catch fire, such as curtains, tablecloths, and paper products.

  1. Use Proper Candle Holders

Select sturdy, non-combustible candle holders to secure your candles. Make sure they are the appropriate size for the candle and won't tip over.

  1. Trim Wick Length

Trim candle wicks to about 1/4 inch to prevent excessive smoke and uneven burning. A long, unruly wick can lead to a larger flame and an increased risk of fire.

  1. Never Leave Candles Unattended

Always extinguish candles before leaving a room or going to bed. Consider using a timer to ensure they are not left burning.

  1. Place Candles on Stable Surfaces

Keep candles on a stable, flat surface, away from drafts that can cause them to flicker or tip over.

  1. Create a "No-Candle Zone"

Keep candles out of reach of children and pets. Educate your family about the dangers of open flames and establish a "no-candle zone" where children should not enter.

  1. Avoid Overcrowding

Do not place too many candles in a small area. Overcrowding can increase the risk of accidents, especially when moving around.

  1. Be Mindful of Candle Placement

Avoid placing candles in high-traffic areas or where they can be easily knocked over. This is especially important in homes with young children or pets.

  1. Install Smoke Detectors

Ensure you have working smoke detectors in your home, especially near areas where you use candles. Regularly check and change the batteries to keep them operational.

Candles can add a touch of ambiance to your home, but safety should always come first. By following these 10 tips, you can enjoy the cozy glow of candles without putting your home at risk of a fire. Remember, prevention is key, but in the event of a fire emergency, contact SERVPRO® of San Diego East for professional fire damage restoration services. Stay safe, and protect your home and loved ones from the threat of candle fires.

Rebuilding Security: Safeguarding Your Building After a Fire

8/2/2023 (Permalink)

building security Prioritizing building security is crucial for occupants of the building.

Experiencing a fire in a building can be a traumatic event that poses significant challenges for the safety and security of the affected property. After a fire, it is crucial to take proactive steps to restore and enhance building security. In this blog post, we will explore essential measures to help you keep your building secure following a fire, ensuring the safety of occupants and preventing further damage or unauthorized access.

Evaluate Structural Integrity

Before addressing security concerns, it is vital to assess the structural integrity of the building. Engage professional inspectors and engineers to thoroughly evaluate the stability of the structure, identifying any potential hazards or areas requiring immediate attention. This evaluation will help determine the feasibility of reoccupying the building and guide the subsequent security measures.

Secure Entry Points

After a fire, it is essential to secure all entry points to prevent unauthorized access and protect the property from potential theft or vandalism. Evaluate and repair damaged doors, windows, and locks. Consider installing temporary security measures such as reinforced boarding or security screens if necessary. Make sure all access points are properly secured before allowing occupants or workers back into the building.

Install Temporary Fencing and Signage

If the building requires significant repairs or is temporarily uninhabitable, consider installing temporary fencing around the premises. This will act as a physical barrier to prevent unauthorized entry and signal that the building is under restoration. Additionally, prominently display signage indicating that the building is off-limits or undergoing repairs to deter potential trespassers.

Enhance Fire Protection Systems

A fire incident should serve as a reminder to review and enhance fire protection systems within the building. Coordinate with fire safety professionals to ensure that fire alarms, sprinkler systems, fire extinguishers, and emergency lighting are in proper working order. Conduct thorough inspections and testing to identify any deficiencies and promptly address them. Upgrading fire protection systems may be necessary to meet current safety standards and provide enhanced security against future fire incidents.

Implement Surveillance and Monitoring

To maintain security and deter criminal activities, consider implementing surveillance and monitoring systems. Install security cameras at strategic locations, such as entry points, hallways, and parking areas. Coupled with proper lighting, surveillance systems act as a deterrent and provide valuable evidence in case of any security breaches. Additionally, consider engaging professional security services to monitor the premises, especially during the restoration phase.

Develop an Emergency Response Plan

Having a comprehensive emergency response plan is crucial for building security after a fire. Collaborate with relevant stakeholders, such as building management, occupants, and local authorities, to develop an effective plan. The plan should include protocols for evacuations, reporting emergencies, contacting emergency services, and addressing security concerns. Regularly educate and train occupants on the emergency response procedures to ensure everyone is prepared and able to act swiftly in case of an incident.

Recovering from a fire incident requires diligent efforts to restore and enhance building security. By evaluating structural integrity, securing entry points, installing temporary fencing, enhancing fire protection systems, implementing surveillance and monitoring, and developing an emergency response plan, you can take proactive steps to keep your building secure and minimize the risk of further damage or unauthorized access. Prioritizing building security after a fire is essential for the safety and well-being of occupants and the long-term protection of your property.

The Essential Guide to Commercial Fire Cleanup: Steps to Restore Your Business

4/5/2023 (Permalink)

apartment fire Hiring a professional restoration company is essential too ensure the safety of the company.

A commercial fire can be devastating to any business. Not only can it cause physical damage to the property, but it can also lead to the loss of important documents, equipment, and inventory. Additionally, it can result in significant downtime, lost revenue, and a damaged reputation. That is why it is essential to have a solid plan in place for commercial fire cleanup. In this blog post, we will outline the key steps involved in the commercial fire cleanup process.

Step 1: Safety First

Before anything else, safety should be the top priority. The first step in the commercial fire cleanup process is to ensure that everyone in the affected area is safe. This may involve shutting off power or gas, assessing the structural integrity of the building, and making sure that there are no hazardous materials present. A professional fire restoration company will have the experience and expertise to handle these safety precautions.

Step 2: Assess the Damage

Once safety has been established, the next step is to assess the extent of the damage. This includes evaluating the damage to the structure itself, as well as any damage to inventory, equipment, and documents. An experienced restoration company will conduct a thorough evaluation of the damage to determine the best course of action.

Step 3: Secure the Site

After the damage has been assessed, the next step is to secure the site. This may involve boarding up windows and doors, fencing off the area, and taking other steps to prevent unauthorized access. This is an essential step to prevent further damage or theft from occurring.

Step 4: Remove Debris

The next step in the commercial fire cleanup process is to remove debris from the affected area. This may involve removing charred materials, ash, and other debris from the building. It is essential to remove this debris quickly to prevent further damage to the structure and to reduce the risk of fire or other hazards.

Step 5: Clean and Restore

After the debris has been removed, the next step is to clean and restore the affected area. This may involve cleaning carpets and upholstery, replacing damaged drywall and insulation, and repainting walls and ceilings. It may also involve restoring any equipment or inventory that has been damaged by the fire.

Step 6: Final Inspection

The final step in the commercial fire cleanup process is a final inspection. This involves a thorough review of the restoration work to ensure that everything has been completed to the highest standards. This step is essential to ensure that the building is safe for occupancy and that all necessary repairs have been made.

In conclusion, the commercial fire cleanup process is a complex and challenging task that requires experience, expertise, and a solid plan. Hiring a professional restoration company is essential to ensure that the process is handled efficiently and effectively. By following these key steps, you can help to minimize the damage caused by a commercial fire and get your business back up and running as quickly as possible.

5 Steps to prevent Commercial Fire

2/11/2023 (Permalink)

fire alarm install Fire alarm installation is important for your property to help prevent fire damage

Fires in commercial kitchens can be devastating. They can destroy property, injure employees or customers, and financially impact your business. There are many things you can do to prevent a commercial fire from happening. Here are five steps that will help you lower your risk.

Keeping your kitchen clean and organized

Keeping your kitchen clean and organized is important to ensure your business is safe from potential fire damage. Clean up spills immediately. Spilled food on the floor, countertops, and cooking equipment can cause a fire. Keep flammable materials away from heat sources and flames. Keep your kitchen well lit so you can easily see the contents of any pots or pans that are bubbling on stovetops or countertops. Ensure to keep paper products placed far enough for them themselves not only to potentially catch fire but also potentially spreading flames further into nearby areas within seconds after being ignited by nearby burners or stoves.

Clean your oven and stove top regularly

To prevent a commercial fire from starting in your kitchen, you should clean your oven and stove top regularly. Keeping grease splatters and potential spills cleaned up off the stove top or in the bottom of the oven can significantly reduce the potential for fire.

Restrict cooking time

Fire marshals have been limiting the hours of operation for restaurants and other commercial kitchens to prevent fires. During off-hours, you should ensure that your kitchen is free of cooking materials such as propane tanks, deep fryers, or grills.

When cooking begins again in the morning or after a break, make sure that all equipment is completely cooled before leaving. Ensure any pilot lights are turned off before leaving the premises at night and never leave food unattended while it's being heated after a break.

Have a fire extinguisher on hand

The first step to preventing a fire is to have a fire extinguisher on hand. The ideal location for this safety tool is in the kitchen, but it's also good to have one near your office or anywhere else flammable materials are stored.

If you're not familiar with how to use an extinguisher, read the instructions on its label before attempting to use it. Ensuring that your fire extinguisher is still in good condition is crucial—the expiry date should appear clearly on its label alongside other important information such as operating temperature range and minimum discharging pressure requirement for safe usage by end users.

Create a safer kitchen environment

Ensuring you have a safe kitchen environment is important to keep from potential fire or water damage. Install a fire alarm and smoke detector in each store location, as well as in the kitchen area to prevent a fire. Create a fire safety plan for your business that includes:

  • An order of evacuation (if there is one) and number of people to evacuate
  • an evacuation route from each building
  • how to notify local emergency responders if needed.

Cooking is one of the most dangerous things people do in their businesses each day. The best way to avoid kitchen fires is to keep your stovetop and oven clean and free from grease build-up. You should also make sure that everyone in your business knows how to use an extinguisher in case there’s ever a fire emergency. Finally ensuring you have a safe kitchen environment can cut back on your chances of a fire breaking out and damage to your property.

4 Fire Safety Tips for Your Home

8/30/2022 (Permalink)

Smoke surrounding  a smoke alarm Smoke alarms are essential tools you can use to prevent a home fire.

Fire Preparation For Your Home

If a fire breaks out in your home in College West, CA, it can be deadly and cause lots of damage. However, by implementing fire preparation measures, you can minimize the risks. To help you get started, here are four tips that you can begin using today. 

1. Make Smoke Alarms a Priority
Smoke alarms are essential tools you can use to prevent a home fire. They should be installed throughout your house, especially in and near the bedrooms. Test your alarms monthly and replace the batteries once a year. Also, never disable them, especially when you are cooking.

2. Use Electrical Appliances Safely 
Check and replace damaged cords or wires on your appliances and other electrical items. Give devices such as lamps and space heaters proper space to prevent them from overheating. And never leave them on overnight or while you’re away from home.

3. Teach Your Children About Fire Safety
A big part of fire preparation is teaching your children the dangers of playing with fire. Keeping matches and lighters out of their reach will also help with this issue. You should also protect your little ones by installing safety caps over outlets. These simple tools will prevent them from sticking items into a wall socket and starting a fire or electrocuting themselves. 

4. Have an Escape Plan
Create an escape plan for your family and practice it at least twice a year. Ensure it includes two ways to escape each room and a place to meet up once everyone gets out of the house. Also, make sure everyone knows to never go back in for important items. You can assure them that a trained restoration specialist will do their best to preserve your family photos and other sentimental things after the fire.
The best way to prevent a fire in your home is to prepare for it. Fire preparation is vital for the safety of your family and your home.

4 Essential Things To Do After Smelling Natural Gas in Your Home

4/22/2022 (Permalink)

Gas stove on It's important to take a look at your stove and make sure it's not on.

What To Do After Smelling Natural Gas In Your Home

If you begin to smell an odor similar to rotten eggs or sulfur in your Allied Gardens, CA, home, you may be experiencing a gas leak. This could lead to a fire or an explosion. In this event, it's vital that you take immediate action. So, here are four essential things to do after smelling natural gas in your home.

1. Avoid Electrical Charges

Any use of electricity should be avoided at all costs. If you do use something electrical, whatever amount of gas is present could spark and create an explosion. These are some things to avoid:

  • Lights
  • Appliances (dishwashers, clothes dryers, etc.)
  • Plugs

2. Look at the Stove

The last thing you want is to have a big scare over nothing. Therefore, it's important to take a look at your stove and make sure it's not on. If it is, you may not be in danger of a gas fire at all. However, you should still stay safe and ensure that everything's okay before returning to normal.

3. Create Ventilation

If you aren't in immediate danger of a gas explosion, take the time to create ventilation. You can do this by opening every door and window possible. However, you'll want to avoid turning on electrical fans. By creating ventilation, you may be able to get some of the gas out of your home.

4. Leave Your Home

As soon as you can, it's vital that you leave your home. This is hard but necessary. If the worst happens and a gas fire occurs, you'll want to be far away from it. Once you're at least across the street, you can call 9-1-1 and locate a fire restoration service.
Smelling gas in your home can be a daunting experience. Regrettably, you can't spend too much time gathering yourself. Assess the potential of a gas fire and get to safety as soon as possible. Even if this precaution is unnecessary, it's still worth taking.

Exploring the Different Types of Fire Extinguishers

3/31/2022 (Permalink)

Types of fire extinguishers Different types of fire extinguishers.

Types of Fire Extinguishers

Responsible homeownership means having an insurance policy that covers damages to your house and its contents due to a fire. Usually, entities with a financial interest in your house, such as a mortgage company will require borrowers to carry this coverage, including properties in Del Cerro, CA. Being a good homeowner also means staying on top of fire preparedness. This includes being careful about the use of open flames on your property. It also means having the means to put out or control a blaze, such as having a sprinkler system that operates when a home fire is detected. Keeping a fire extinguisher in various rooms is also part of a complete plan, but not all types are created equal. Here’s what you should know.

Taking a Closer Look at Extinguishers

Extinguishers come in three different classifications based on effectiveness against a type of blaze. Class A refers to fires caused by trash, wood and paper. Class B includes fires started by flammable liquids, while class C is for blazes caused by live electricity. Each fire extinguisher has a label with the classification and a number that corresponds to the device’s effectiveness. Extinguishers come in different sizes that correspond to usage:

  • Stove-top: Ideal for mounting above a range or oven
  • 2-pound: Good for use in a vehicle
    5-pound: Easily accessible in a kitchen or utility room
  • 10-pound: Best for garages or workshops where a blaze can rapidly spread

Taking Care

It’s important to make sure that these fire defense items are stored properly. Should a home fire occur, you don’t want to learn that the extinguisher is not where you need it or has lost pressure. Extinguishers should be replaced or refilled after a single-use.
While you never hope to experience a home fire, you should be knowledgeable of what to do in advance. Professional fire remediation experts can help restore your home to pre-damage conditions, but proper use of a fire extinguisher can reduce overall damage. It can minimize the time it takes to repair your home.

Managine Smoke Detector Power

2/18/2022 (Permalink)

smoke detector with white smoke and red warning light By maintaining your smoke detection systems, you can prevent fire damage and loss of life.

Control The Smoke Detector's Power

Keep your home in San Carlos, CA, free from fire hazards by maintaining and monitoring your smoke alarm systems. Read on to glean a few tips related to these important home devices.

1. Source

Know the power source of your chosen model of smoke detector. Some models can be wired directly to the wall, and thus will run on your home’s electrical system. Others use replaceable 9-volt batteries or non-replaceable lithium ion power sources. Some detectors may combine both of these methods as a backup in case of home power failure. Regardless, you should test the units each month to ensure that they are fully functional. If the device is blinking or beeping, this may be an indicator that the unit has insufficient power.

2. Age

Smoke detectors are not built to last forever. Both ionization and photoelectric alarm types suffer from reduced effectiveness as they age. A typical smoke alarm will only last for about ten years. Luckily, they are inexpensive to replace, typically costing less than $20. A wide selection of models is available at your local hardware or department store. Examine the date of manufacture on the back of the unit to determine an appropriate time to rotate out your set of detectors.

3. Safety

By maintaining your smoke detection systems, you can prevent fire damage and loss of life. Many residential fires occur while most people are asleep, so it is extremely important to have an automated system in place to alert friends and family to fire hazards. The risk of health and property damage from fire goes down substantially when smoke detectors are well-distributed throughout the house, especially if they are connected to activate one another when any single unit detects smoke.

By taking care of your smoke alarm setup, you can prevent physical harm to your occupants and damage to your home that could require costly professional fire restoration.